PRODUCT CODE: PHT404 + PHTKIT

The PHT-404 has a cast aluminium flare. No crossover is needed. Included is a cap and resistor kit. Along with the HP-15W you can build yourself a great sounding 15 and horn cabinet or a pair of foldback monitors without putting your hand too deep into your pocket.

SPECIFICATIONS GENERAL

Usable Frequency Range: 3K~15K Hz
Power Rating: 20 W
Average Sensitivity (1w/1m): 105 dB
Impedance: 8 Ohm
Voice coil Diameter: 25.4 mm (1 in)
Voice coil Material: Round Copper Wire
Horn Material: Cast Aluminium
Diaphragm: Phenolic Resin
Nominal Coverage Angle: (HxV)-5 dB 100°x 80°
Cut off Frequency: 780 Hz
Mouth Width: 270 mm (10.6in)
Mouth Height: 109 mm (4.3 in)
Mouth Depth: 201 mm (7.91 in)
Mounting Flange Thickness: 2.5 mm (0.1 in)
Mounting Holes: 4x6.35 mm (0.25 in

To download a spec sheet or receive a full P.Audio pricelist please click here.

Warranty: 12 Months