PRODUCT CODE: B52M1000

ACTIVE THREE-PIECE SYSTEM

The MATRIX-1000 V2 is a complete sound reinforcement SOLUTION comprised of two 10” two-way powered satellites and a dedicated powered 15” subwoofer. The MATRIX-1000 V2 has a built-in three-channel 700-watt power amplifier, three distinct volume controls, electronic crossover with equalization and VCA compressor.

The circuitry is designed and fine-tuned to integrate all components for the best possible sound. There is no need to tweak or finesse settings on a crossover or compressor to make your system sound great. Simply roll the system into place on its heavy duty casters, plug in the AC, connect the two speaker cables (included), run two XLR cables to your mixer and you’re ready to go!
 

Download the Instruction Manual
 

V2 UPGRADES: THE BEST JUST GOT BETTER

 • A new high-performance compression driver for a smoother frequency
 • response and lower distortion throughout the upper midrange frequencies.
 • A new elliptical wave guide with more uniform dispersion.
 • The addition of a voltage controlled amplifier (VCA) on all three amplifier
 • channels to minimize the effects of amplifier clipping. This lowers the
 • maximum distortion produced at VERY high drive levels and offers additional
 • protection for the speaker components.
 • More durable FREE dust cover.
 • Improved B-52 handles. 

SUGGESTED APPLICATIONS:
Mobile DJ * Karaoke * Nightclub, Restaurant, Bar Install * Corporate Audio / Video * Home Entertainment System * Live Sound System * Stage Monitoring System * Booth Monitoring System * Drum Monitoring

BUILT-IN 3-CHANNEL AMPLIFIER
The 15” subwoofer enclosure is divided into two separate compartments. The front chamber serves as the cabinet for the 15” subwoofer. The rear chamber houses all of the system’s electronic circuitry, which includes the amplification for all three components, power supply and preamps. The 15” subwoofer has a power handling capability of 400 watts and a nominal impedance of 8 ohms. 

10" SATELLITE SPEAKERS
The MATRIX-1000V2 satellites are loaded with a custom designed 10” speaker and 1” titanium diaphragm compression driver. The “horn” is a 90 by 60 elliptical waveguide that can be rotated 90 to optimize the dispersion pattern to best suit your particular application. These versatile speakers are pole-mountable and can sit as stage monitors. They also include 3/8” – 16 tpi flying hardware for small venue permanent installations. The rounded front of the satellite speaker is a perfect fit for the convex face of the subwoofer, allowing a mobile entertainer to stack, roll and transport the entire MATRIX-1000V2 in and out of a venue in record time.

TRANSPORTING THE SYSTEM
To transport the MATRIX-1000 V2, simply set the subwoofer on its casters and place the satellite speakers on to the subwoofer’s front panel, facing down. Fasten the satellites with the included locking strap using the handles on either side of the subwoofer cabinet. Place the included cover over the entire system and you’re ready to move the MATRIX-1000 V2 with ease.

 

SPECIFICATIONS:

700-WATT 3-CHANNEL AMPLIFIER

Subwoofer Power Output 10” Two-way Power Output Line in: Parallel out: Input Impedance: Speaker Out: Power Requirement: 400 W 150 W XLR Female XLR Male 48 k Ohms Speakon NL4 Style Connector 115V<>50/60Hz<>10A 230V<>50/60Hz<>6A

15" SUBWOOFER

Speaker: Nominal Impedance: Subwoofer Freq. Response: Sound Pressure Level (1w/1m): Max. SPL: Weight: Dimensions (Transport): 15” Custom Built B-52 Subwoofer 8 Ohms 40 Hz; 120 Hz +/- 3dB 102 dB (half space) 127 dB @1% THD 120 lbs 28” (H) x 19” (W) x 23” (D)

10' TWO-WAY SPEAKERS

Speaker Input: LF/MF Woofer: HF Driver: HF Dispersion: Nominal Impedance: Active Freq. Response: Crossover Frequency (passive): Sound Pressure Level (1w/1m): Max. SPL: Weight: Dimensions (Upright): Speakon style connector (pin 1+ = +, pin 1- = -) 10” Custom Built B-52 Transducer 1” Titanium Diaphragm 90 x 60 4 Ohms 120 – 19K Hz +/- 3dB 2.5 kHz; 12 dB / Octave 101 dB (half space) 124 dB @10% THD 30 lbs 19” (H) x 12” (W) x 11” (D)

COMPLETE SYSTEM

Weight: Dimensions (Transport): 180 lbs 39” (H) x 19” (W) x 23” (D)

NB. pictured speaker stands not included

Warranty: 2 Years